Shrubs tufts - 6mm zelfklevend - groen met licht groene blaadjes
Moderne zelfklevende tufts met miniatuurblaadjes om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
6mm hoog
sheet is 4 bij 15cm groot
ong 40 tufts
Shrubs TUFTS - 6mm Self-adhesive - Light Green
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK+leaves
Fiber Size: 6mm high
Plastic sheet size: 4x15cm
Content: 40 tufts
#shrub #tufts #greenstuffworld #light #green #miniatuur #bloemen
Grasmat - maak je eigen vorm groen
Leuk zo'n vel met kleine tufts, maar als je een strook wilt maken of een bepaalde vorm dan ben je effe bezig. Deze matten zijn scheurbaar of knipbaar in de vorm die je nodig hebt. Dus ook de grotere stukken die je wilt bedekken (voor langere grasmatten kies dan grasmat groot!). Handig om scenery te maken, vooral die van wargames, De grasmatten zijn er in diverse uitvoeringen.
En uiteraard te combineren met andere soort tufts, gras, grondbedekking, turf, struiken, grind etc.
Gebruiksaanwijzing:scheur of knip de gewenste maat, beplak met PVA, of andere lijmsoort. laat drogen.
Uitvoering: groene bosgrond
Inhoud: 2 matten / Maat: 90x145mm / Hoogte 10mm / ong 200 kleine tufst / Niet zelf klevend
Grass Mat Cut-Outs
Grass mat cut outs for instantly setting up a large surface for landscaping and scenery-making, especially for wargames. Grass mat cutouts are available in different styles, and can be complemented by adding various layers of foliage, turf mounds, tufts and shrubberies for a very realistic setting.
Size: 90x145mm Height: 10mm
Contains 2x Grass Mat Cut-Outs. Each pack can produce approximately 200 small tufts. Not self-adhesive.
XPS extruded polystyrene foam | Open-Cell XPS Foam
Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals.
The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.
Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects.
There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details.
Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details.
When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes.
Content: 200x300mm
Thickness: 10 mm
Type: Open-cell
Estimated Density: 33 kg/m³
WARNINGS:
Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue.
This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes.
Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together.
Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid.
Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures.
The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).
Doorn gras tufts - 14mm zelfklevend - donker groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
14mm hoog
sheet is 7.5 bij 13.5cm groot
48 tufts
Scrubs
Decorate your sci-fi and fantasy themed bases or dioramas with these unique spiky bushes.
Choose the most suitable colour from the extensive collection to make your bases or scenery look as realistic as possible.
To attach simply pull the tufts of grass out of the pack with tweezers and attach them with the self-adhesive part. Some more complicated surfaces may require a little glue or white glue for permanent attachment.
Fibre size: 14 mm highContent: 48 scrubs
#14mm #tufts #greenstuffworld #donker #groen #scrub #thorny #spikey dark #green #greenstuffworld
Doorn gras tufts - 14mm zelfklevend - licht groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
14mm hoog
sheet is 7.5 bij 13.5cm groot
48 tufts
Scrubs
Decorate your sci-fi and fantasy themed bases or dioramas with these unique spiky bushes.
Choose the most suitable colour from the extensive collection to make your bases or scenery look as realistic as possible.
To attach simply pull the tufts of grass out of the pack with tweezers and attach them with the self-adhesive part. Some more complicated surfaces may require a little glue or white glue for permanent attachment.
Fibre size: 14 mm highContent: 48 scrubs
#14mm #tufts #greenstuffworld #licht #groen #scrub #thorny #spikey
ABS Plasticard A4 size - Thickness 1.5mm
Plasticard sheets made of ABS plastic (Acrylonitrile butadiene styrene) known as Plasticard. The generic term plasticard refers to a genre of plastics widely used in modeling. ABS plastic is the one used to make LEGO pieces.
This plastic has very attractive physical properties for modeling since despite its strength and durability it is very easy to work. It can be bought either in sheets of different thicknesses, smooth or textured, or in the form of profiles with very diverse shapes. The ideal glue for ABS plastics is cyanoacrylate. The PVA glue can also be used, but it takes much longer to dry.
ABS plasticard also has thermoplastic properties, which allows to alter its shape by using diverse sources of heat.
Plain Plasticard sheets in A4 size
This set contains 3 A4-sheets (20x30cm)
#abs #plasticard #A4 #1.5mm #greenstuffworld
Acrylic texture for rust effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity.
This paste is thick and has a dense consistency, suitable for representing rust textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
Contains 1 bottle of 30ml textured paste
Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken.
#earth #series #textured #paste #greenstuffworld
Kruk
Natuurlijk materiaal
Snijden met een scherp mes, schaar of scheur
Gebruik dit materiaal als base, basis, om muren, vloeren te maken, grond, treinondergrond etc
1 zijde ruw, 1 zijde gladAfmeting: 198x298mmDikte: 5 mmInhoud: 1 vel
Deze sneldrogende, op waterbasis, verf zorgt tijdens het droogproces ervoor dat je een "gebroken eierschaal" effect krijgt. Gewoon in 1 stap! Opbrengen direct uit het flesje op elke ondergrond. Hierdoor hoef je niet laag-op-laag te werken.
Als je het op een extreem gladde ondergrond wilt aanbrengen, is het verstandig om die ondergrond een beetje op te ruwen met bijv schuurpapier. Het qraucelé effect wordt daardoor beter. Je kunt evt voor de zekerheid een matte primer gebruiken onder deze verf als je de ondergrond niet opgeruwd krijgt.
Direct aanbrengen met een kwast en het dikte van aanbrengen bepaalt ook de diepte van de scheuren. Laat de verf natuurlijk drogen, luchtdrogend, en probeer het proces niet te versnellen met warmtebronnen. Het effect wordt dan namelijk minder. Als je kleine of onregelmatige basis hebt dan kan het "gebroken eierschaal" effect in diepte of lengte van de scheuren beinvloeden.
Als de verf is opgedroogd kun je effect aanbrengen met pigmenten, tufts, static grass of andere verf.
Witte verf, 1 fles, 60ml. Gemakkelijk in gebruik door de fles, droogt daardoor niet uit.
#winterfell #plains #crackle #paint #greenstuffworld #frozen #ice
3D printed set - Thorn branches
ABS-like resin thorny branches kit offers a realistic design to imitate real species. These resin bits are available in different shapes and sizes to meet various needs and scales. Thanks to their flexibility, they are durable and resistant, making them easy to handle and incorporate into dioramas and other scale models. In addition, modelers can customize and paint them to suit their creative vision, increasing the overall realism and visual appeal of the composition.
Choosing the appropriate modeling glue, modeling tools, or approach for a given task with your Warhammer bits is essential for achieving optimal results and efficiency in any project. Understanding the project's requirements, researching available options, and evaluating their performance and suitability are key factors. Additionally, considering the expertise and resources available, staying up-to-date with the latest developments, seeking advice from experts, and thinking about long-term maintenance are all crucial aspects of making an informed decision.
This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures.
Contains: x30 Thorn plants
#resin #3d #printed #thorn #branches #greenstuffworld #vegetatie
Fish Collection
Give your bases, dioramas, wargames, and miniatures a marine touch with this high-quality resin fish collection! Carefully designed to mimic actual fish and miscellaneous marine animals, they come in different shapes and sizes to accommodate different modeling scales.This product comes unpainted and is perfect for 28mm miniatures to 54mm miniatures (1:48 - 1:35).
Each set contains 14x Resin Fish.
#greenstuffworld #fish #vissen #resin #14pcs
Miniatuur blaadjes
Deze miniatuur blaadjes zijn met zorg gestansd uit speciaal materiaal. Ze zijn zo ontworpen dat ze een realistische look hebben met een echt bladvorm. Dit materiaal is bijzonder geschikt om bomen te voorzien van gebladerte maar ook struiken of ondergrond. Het maken van een klimop, grondbedekking of bosgrond is eenvoudig met deze miniatuur blaadjes.
De inhoud is 60ml, 15gr, in herafsluitbare doorzichtige plastic doosjes.
MICRO LEAVES
Micro Leaves are a very delicately cut, special flocking material. They have been designed to have a deceptively real, leaf-like shape.
The material is particularly suited for flocking trees, tufts, or shrubbery, as well for designing ivy, ground-cover plants, or forest floors.These micro leaves are packaged in closed plastic boxes of 15gr. capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases.
#greenstuffworld #micro leaves #orange #micro #mini #blad #60ml
3D resin printed set - Small Spiders
A 3D-printed set designed for modeling and wargames can be an excellent addition to your hobby toolkit. They offer the opportunity to create custom and intricately detailed terrain pieces, DnD miniatures, and Warhammer accessories, elevating your gaming experience. Adding these high-quality ABS-like resin bitz to your bases, dioramas, and figures can bring a realistic touch to your creations. Carefully crafted to mimic real species, these bits come in various shapes and sizes, catering to a wide range of needs and scales. Whether you're a model enthusiast or a tabletop gamer, these 3D-printed bits provide versatility and creativity to enhance your hobby projects.
Choosing the appropriate modeling glue, modeling tools, or approach for a given task with your Warhammer bits is essential for achieving optimal results and efficiency in any project. Understanding the project's requirements, researching available options, and evaluating their performance and suitability are key factors. Additionally, considering the expertise and resources available, staying up-to-date with the latest developments, seeking advice from experts, and thinking about long-term maintenance are all crucial aspects of making an informed decision.
This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures.
Each set contains 40 x resin small spiders
#resin #3d #printed #greenstuffworld #small #spiders
Forest Set
With this set at your disposal, you'll be able to replicate all sorts of typical floral and forest environments found in nature, replicating the typical vegetation of woodland and forest areas.
This set includes everything you need to get started, from pigments and different modeling materials to different types of foliage and even some characteristic animals, which will allow you to customize your scale model or forest diorama. Perfect for beginners and hobbyists alike, these modeling and wargaming materials will help you bring your vision to life.
Content:
Tufts Grass XXL - Light Green
Fine Foliage Foam - Medium Green (10-15g)
MICRO LEAF - Light Green Mix
Paper Plants - Brackena Ferns
Paper Plants - Burdock
Natural Modeling Leaves - Spring Green
Grass TUFTS - 12mm - 12mm - LIGHT GREEN
Grass TUFTS - 6mm - LIGHT GREEN
Static Grass Flock 4-6mm - SPRING GRASS - (10-13g)
Pigment WILD MOSS
Pigment NATURE GREEN
Resin pieces: Birds and flowers
Small tree bark (15-20g)
#environment #forest #basing #set #greenstuffworld
3D printed set
Set of high quality resin grass clumps or tufts. Carefully designed to imitate real species and come in different shapes and sizes to suit all needs and scales. Ideal for dioramas and scenery.
This product comes unpainted and is perfect for 1:48.
Contains: x30
3D geprint hoogkwaliteit resin
Set van 30 gras klompen perfect voor schaal 1:48. Ontwerp is zo gemaakt dat er allerlei variaties groen mee kunnen worden gemaakt op je base, scenery of terrain.
Inhoud: 30 stuks
Schaal 1:48
#resin #3d #printed #grass #clumps #gras #klompen #greenstuffworld #vegetatie
Closed cell XPS foam 30mm | Closed cell extruded polystyrene foam | Blue Board
Closed-cell extruded polystyrene foam XPS also called Blue Board or Styrofoam is lightweight, tough, durable, and ideal for crafting terrains such as hills and cliffs, making gaming boards, different model building elements such as bricks, and even buildings, and bases. It is a lightweight and durable material that is easy to work with, making it a popular choice among hobbyists and professionals.
Extruded XPS is a closed-cell foam, which means it has a high resistance to moisture and is a good thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other model-building elements, including buildings, bases, and bricks, as well as ideal for making gaming boards, dioramas, and other DIY projects.
There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details.
Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details.
When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes.
Content: 200x300x30mm
Type: closed cell blue board
Estimated Density: 36 kg/m³
WARNINGS:
Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue.
This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes.
Always use appropriate glues such as Tuft Glue or hot glue to stick styrofoam together.
Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid.
Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures.
The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).
Special effect Gunfire Effect 3D set
Want to bring your miniatures and dioramas to life with the thrill of battle? Discover our wide range of special effects designed to bring authenticity to every scene.
From bright flashes to realistic plumes of smoke, our bits are available in a variety of styles to suit your creative needs. Do you prefer a design with the bullet being fired or without? No problem! We have options to suit all tastes.
They are carefully designed to fit the barrel of any firearm in your miniatures and dioramas. Whether you're recreating a historical skirmish or imagining a sci-fi scenario, our firing effects add that final touch of realism that will make your creations stand out.
What's more, our resin items are made from high quality materials to guarantee durability and strength, ensuring they will look impeccable for years to come.
Don't underestimate the impact that small details can have on your modelling projects. With them you can capture the essence of the action and the thrill of battle like never before.
Explore our collection today and take your miniatures and dioramas to the next level with our shooting bits - make your battle scenes truly unforgettable with us!
These products are delivered unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale).
Each set includes 23 x Gunfire Effect
#resin #3d #printed #gunfire #effect #greenstuffworld
Acrylic texture for soil and earth effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity.
This paste is thick and has a dense consistency, suitable for representing mud textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
Contains 1 bottle of 30ml textured paste
Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken.
#earth #series #textured #paste #greenstuffworld
Grass tufts - 2mm zelfklevend - donker groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
6mm hoog
sheet is 4 bij 15cm groot
ong 40-50 tufts
Grass TUFTS - 6mm Self-adhesive - dark green
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 2mm high
Plastic sheet size: 4x15cm
Content: 40-50 tufts
Grass tufts - 6mm zelfklevend - winter groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
6mm hoog
sheet is 4 bij 15cm groot
ong 40 tufts
Grass TUFTS - 6mm Self-adhesive - WINTER
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 6mm high
Plastic sheet size: 4x15cm
Content: 40 tufts
Grass tufts - 12mm zelfklevend - droog bruin
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
12mm hoog
sheet is 4 bij 15cm groot
ong 40 tufts
Grass TUFTS - 12mm Self-adhesive - Winter
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 12mm high
Plastic sheet size: 4x15cm
Content: 40 tufts
Fluor semi transparante acryl gel om realistische bewegende vlammen, magma, vuur of magische effecten na te bootsen. Het is ideaal voor bases of kleinere scenery die een bewegend water, vuur of vlameffect nodig hebben, in een lekkere toxic kleur.
Droogtijd ligt aan de dikte van de gebruikte hoeveelheid. Handigste is om dunne lagen aan te brengen. Je kunt dit produkt prima combineren met de Ultraviolette Resin.
Inhoud 30ml
Aanbrengen met kwast
Ciano Cleaner and debonder
Solvent, cleanser, stain remover of cyanoacrylate glues in a colourless gel. It cleans, debonds and removes glue (dried or residue) from a wide variety of surfaces such as metal, wood, glass, plastic, and textiles. Also helps to clean glue residue on your fingers or to peel off fingers if glued together.
How to use
Apply the gel above the surface to be softened or cleaned, leave it on for 30 minutes then clean. If necessary, repeat the operation. Really long exposures could damage some types of plastics.
Contains 20ml.
3D printed set
Set of high quality daisies and dandelions. Carefully designed to imitate real species and come in different shapes and sizes to suit all needs and scales. Ideal for dioramas and scenery.
This product comes unpainted and is perfect for 1:48.
Contains: x44
3D geprint hoogkwaliteit resin
Set van 44 madeliefjes en paardebloemen perfect voor schaal 1:48. Ontwerp is zo gemaakt dat er allerlei variaties groen mee kunnen worden gemaakt op je base, scenery of terrain.
Inhoud: 44 stuks
Schaal 1:48
#resin #3d #printed #daisy #dandelion #madelief #paardebloem #greenstuffworld #vegetatie
Set van hoge kwaliteit polystone boomstronken (dus geschikt voor buiten afhankelijk van verftechniek!) hebben een duidelijke nerf, zijn voorzien van knoesten en kleine verweerde plekken. Daarnaast hebben zij een gezicht in de stam. Een ideale maat voor fairy gardens, fantasie, betoverde of spookachtige diorama's met een bosthema.
Dit product is ongeverfd en perfect voor miniaturen van 25-28-35 mm (1:76, 1:48, 1:35). Het kleinste stuk is 1cm hoog, 1 cm breed en 1.5cm lang. Het grootste stuk is 1,5 cm hoog, 2cm breed en 3cm lang. Elke set bevat 10 verschillende boomgeesten.
Revitalize your gaming experience with our exclusive collection of Warhammer bits in 1:48 scale, 3D printed resin piece sets that will transform both your battlefield and miniature bases into stunning scenery. Our online store specializes in offering detailed bone, skull, and skeleton sets, all designed to be compatible with a variety of miniature games, including 9Age, Warhammer Fantasy, Warhammer 40k, and the recently reborn Warhammer Old World.
Precision manufactured from high-quality ABS-like resin using advanced 3D printing technology. Thanks to this technique, our pieces stand out for their level of detail, capturing realistic textures and shapes that bring a new dimension to your miniatures and modeling projects.
From tiny skulls to elaborate skeletons, each piece is designed to fit perfectly into your Warhammer army, giving you the freedom to create and customize your figures to your liking. Whether you are a modeling enthusiast or an avid Wargames player, our bits will offer you an economical and effective way to customize your figures and create armies that truly reflect your style and vision.
They are delivered unpainted and each set comes with its print matrix with easy-to-remove stands, making the assembly process easy and ensuring that you can get started on your creations without hassle.
Each blister package includes 52x Animal Bones 1:48
Saguaro Cactus 3D printed set
This set of resin products created by Green Stuff World has been specially designed for miniatures games such as Warhammer: The Old World. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures and accessories with exceptional detail, enhancing your gaming experience.
Bring a realistic touch to your bases, dioramas and figures using these high quality, ABS-like bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales.
Selecting the right model glue and modelling tools is essential to assemble your Warhammer bits effectively and achieve optimum results. Understanding the project requirements, exploring the available options and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice and considering long-term maintenance are crucial to making informed decisions.
These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale).
Each set includes 15 x saguaro cacti.
#resin #3d #printed #saguaro #cactus #greenstuffworld
Doorn gras tufts - 14mm zelfklevend - droog groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
14mm hoog
sheet is 7.5 bij 13.5cm groot
48 tufts
Scrubs
Decorate your sci-fi and fantasy themed bases or dioramas with these unique spiky bushes.
Choose the most suitable colour from the extensive collection to make your bases or scenery look as realistic as possible.
To attach simply pull the tufts of grass out of the pack with tweezers and attach them with the self-adhesive part. Some more complicated surfaces may require a little glue or white glue for permanent attachment.
Fibre size: 14 mm highContent: 48 scrubs
#14mm #tufts #greenstuffworld #dry #groen #scrub #thorny #spikey #droog #green #greenstuffworld
ABS Plasticard A4 size - Thickness 3mm
Plasticard sheets made of ABS plastic (Acrylonitrile butadiene styrene) known as Plasticard. The generic term plasticard refers to a genre of plastics widely used in modeling. ABS plastic is the one used to make LEGO pieces.
This plastic has very attractive physical properties for modeling since despite its strength and durability it is very easy to work. It can be bought either in sheets of different thicknesses, smooth or textured, or in the form of profiles with very diverse shapes. The ideal glue for ABS plastics is cyanoacrylate. The PVA glue can also be used, but it takes much longer to dry.
ABS plasticard also has thermoplastic properties, which allows to alter its shape by using diverse sources of heat.
Plain Plasticard sheets in A4 size
This set contains 2 A4-sheets (20x30cm)
#abs #plasticard #A4 #3mm #greenstuffworld
Shrubs tufts - 6mm zelfklevend - groen met oranje blaadjes
Moderne zelfklevende tufts met miniatuurblaadjes om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
6mm hoog
sheet is 4 bij 15cm groot
ong 40 tufts
Shrubs TUFTS - 6mm Self-adhesive - Orange
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK+leaves
Fiber Size: 6mm high
Plastic sheet size: 4x15cm
Content: 40 tufts
#shrub #tufts #greenstuffworld #orange #miniatuur #bloemen
Grass tufts - 2mm zelfklevend - winter wit
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
2mm hoog
sheet is 4 bij 15cm groot
ong 40-50 tufts
Grass TUFTS - 6mm Self-adhesive - winter white
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 2mm high
Plastic sheet size: 4x15cm
Content: 40-50 tufts
Grass tufts - 2mm zelfklevend - droog groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
6mm hoog
sheet is 4 bij 15cm groot
ong 40-50 tufts
Grass TUFTS - 6mm Self-adhesive - dry green
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 2mm high
Plastic sheet size: 4x15cm
Content: 40-50 tufts
Grass tufts - 12mm zelfklevend -donker groen
Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen.
Nylon grass
12mm hoog
sheet is 4 bij 15cm groot
ong 40 tufts
Grass TUFTS - 12mm Self-adhesive - Winter
Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.
Type of Flock: NYLON FLOCK
Fiber Size: 12mm high
Plastic sheet size: 4x15cm
Content: 40 tufts
Water effect Gel - 250ml
Transparent acrylic gel specially designed to replicate moving water, waves, and splashes with a realistic finish. It is perfect to achieve a depth effect as well as a realistic watercolor which makes it ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles.
Splash gel dries in 24 hours, although it could be more or less depending on the thickness of the application.The texture is thick enough to be poured onto all kinds of surfaces, even slopes. It is recommended to apply in thin layers, adding multiple layers if necessary. You can model the surface while it dries using old brushes, sculpting tools, or toothpicks to create water wave crests, waterfalls, and rough seas, among others.
It can be diluted either with water or acrylic thinner to change the consistency and mix it with other products of the same range or small amounts of acrylic inks to slightly change the color.
Content: 250ml
#water #gel #effect #greenstuffworld #splash #250ml #transparant
