Dark and Dry Crackle Effects has been formulated for creating dark and crackled soil on the lower surfaces of vehicles, dioramas, and vignettes.
This product has been developed for the creation of scale crackle effects.
On an acrylic base, use a thin layer and let dry. You can modify the thickness of the layer or speed up the drying process with a hairdryer.
No toxic.
** Watch here a video on how to use crackle effects textures.
A low odor, 2 part component epoxy resin that simulates crystal clear water for miniature, dioramas, vignettes, etc and other hobbies.
It includes 2 syringes and instructions in the box.
It does not shrink and nor leaves bubbles.
High quality product completely transparent that can be thinned if desired.
Mix resin and hardening agent in 2:1 ratio an let dry for 24 hours.
*Drying time depends on the amount applied and the ambient temperature.
375ml.
Instructions and guide in the box
The tone of this texture and the appearance mimic a muddy terrain. To reinforce the wet effect, varnish can be applied in some areas.Download the HowTo Use Guide here:
Limestone texture with a red tone suitable for planets with hot surfaces and complicated conditions for any form of life.Download the HowTo Use Guide here:
This product is a preservative for reusable natural plants.
You just need to put the branch or the small plant in the container with the product overnight and the sap will be replaced by the agent getting it to remain undamaged or wither in our diorama.
The plants can be painted with acrylics in order to avoid that t plants color can be weakened over time by the elimination of chlorophyll.
The jar is wide enough to put the plants without difficulty.
Volume: 250ml
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for late fall sceneries and battle boards.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.)
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for summer sceneries and battle boards.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.)
Foam Sealer is a fine paste intended for sealing any type of foam.This paste does not damage the foam and protects it from subsequent aggressive processes.It is an acrylic product, so you can dilute it with water and clean your tools easily.We recommend to apply it with a spatula to distribute the paste over the foam.Dries in one hour (depending on the thickness of the applied layer and the environmental conditions).Comes in a neutral white color not to affect the further paint layers.Close the packaging well, allowing the product to last longer.Use a spatula or an old brush for handling.
Volume: 250ml.
*Download the HOWTO use product guide here.
Light Earth is the perfect product in texture and tone for recreating lighter shades of earth on diorama or vignette bases where light earth tones and fine textures are needed.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas and vignettes.
Perfect results in thin or thick layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Pacific Blue dense gel specially developed to mimic the waters of the Pacific Ocean.
To create a sense of depth, apply the gel over a painted surface.
Drying time is dependent on the amount used; however, 24 hours is what we recommend.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas.
Perfect results in layers from 0.1 to 3 mm.
It can be diluted with water or an acrylic thinner to improve its flow.
Perfect for 1:700 and 1:350 scales or for any other diorama.
No toxic.
Natural soil with small gravel.
This reference is perfect for use in any scene or diorama to represent an arid terrain in 1/35 scale.
It can also be used on any type of base from 28mm to larger scales.
It can be adhered to the ground using white glue or Gravel & Sand Fixer (AK118).
Wet Crackle Effects has been formulated to create wet crackle ground on the undersurfaces of vehicles, dioramas and vignettes.
This product has been developed for the creation of correct scale crackle effects.
On an acrylic base, use a thin coat and allow to dry. You can modify the thickness of the layer or speed up the drying process with a hairdryer.
Non-toxic.
** Watch here a video on how to use crackle effects textures.
Accumulated Dust with texture, this product has been formulated to create splatter effects and textures on vehicles, dioramas and vignettes.
Accumulated Dust has just the right consistency to apply on the lower parts; it is easily handled with the brush, creating realistic textures of accumulated dust.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
Special effects for splashes on vehicles, dioramas and vignettes.
Its composition allows an easy handling with brush achieving a very realistic texture and effect on the lower parts of the vehicles.
Special consistency for splash effects.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
A low odor, 2 part component epoxy resin that simulates crystal clear water for miniature, dioramas, vignettes, etc and other hobbies.
It includes 2 syringes and instructions in the box.
It does not shrink and nor leaves bubbles.
High quality product completely transparent that can be thinned if desired.
Mix resin and hardening agent in 2:1 ratio an let dry for 24 hours.
*Drying time depends on the amount applied and the ambient temperature.
Instructions and guide in the box
180ml
Cork is the bark of the cork oak, a tree found mainly in the western Mediterranean. Used for basing and other creative
Includes 3 sheets of FINE grained.
200x300x1-2-3mm
A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
This texture is perfect to represent realistic snowy areas and can be combined with other products of the Dioramas series to achieve different types of snow effects.Download the HowTo Use Guide here:
This cool green texture will make your miniatures stand out on an original surface made up of emeralds and shiny stones. Depending on the position of the light, the brightness of the minerals can be observed.Download the HowTo Use Guide here:
The turquoise tone of this texture is indicated for soils with a predominance of minerals and precious stones with a bluishtone on the surface of the planets. Depending on the position of the light, the brightness of the minerals can be observed.Download the HowTo Use Guide here:
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for representing dry grass.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for spring sceneries and battle boards.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.)
The Neutral Earth texture allows the modeller to create their own earth tones. It comes in a neutral white that can be coloured with acrylics for use on diorama bases or vignettes allowing a wider range of tones.
This is a high quality acrylic product developed for extreme realism.
Stir well, slowly adding small amounts of your colour until the desired tone is achieved.
Perfect results are achieved by working in thin or thick layers.
If desired, this gel can be thinned with water or an acrylic thinner to improve the flow on the surface.
Non-toxic.
Selected natural gravel suitable for recreating railway ballast.
This reference is perfect for use in any 1/72 and H0 scale railway scene.
It can also be used in any type of terrain from 28mm to larger scales.
It can be adhered to the ground using white glue or Gravel & Sand Fixer (AK118).
Specially selected natural gravel, perfect for recreating groundworks in any type of scene or diorama.
This product is best suited for use in 1/35 scale railway scenes, but it can also be used for supplementing any type of ground on bases ranging from 28mm to larger scales.
It can be fixed to the ground using PVA glue.
Splatter Wet Ground has been formulated to create wet ground splatters and build-up on vehicles, dioramas and vignettes.
Wet Ground has just the right consistency; it handles easily with the brush, creating realistic textures of wet soil build-up and dirt on the undersurfaces of vehicles has never been easier.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
Splatter Wet Mud has been formulated to create wet mud splatter effects on vehicles, dioramas and vignettes.
Splatter Wet Mud has just the right consistency; easily handled with the brush, creating realistic wet mud splatter textures on the undersurfaces of vehicles has never been easier.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
This two-component product allows room settings with ice.
The resin worked in thin layers allows breaking and texturing the pieces of ice.
It also includes an acrylic product to imitate surface textures.
It can be combined with other products of the Dioramas series to get many settings.
Content:
Ice Resin 120ml
Hardener 30ml
Ice Surfazes 17ml
2 Syringes
