Darkness and claustrophobia are the first of many enemies you will face as you head into the subterranean depths. You must navigate twisting corridors and perilous traps to infiltrate the vaults and claim your prize…
This box contains all the terrain you need for a single-level dungeon or castle interior, suitable for many fantasy miniatures games and RPGs. It features a wide range of wall layouts, interactive dungeon furniture, and a selection of traps and objective pieces. The set is fully modular and can be assembled in any combination you choose for a different set-up every time. The vaults can be expanded with other sets from the Battle Systems terrain range.
The terrain is supplied flat-packed on high-quality, high-density card, printed in full colour on both sides, so no painting required! The terrain requires assembly, and some smaller parts will require glue. Please see our Tutorials page for more details and full instructions.
The Vaults of Enveron are also included in the Maladum: Dungeons of Enveron Starter Set.
Product Contents
1 Printed Neoprene Gaming Mat 2' x 2' / 60cm x 60cm
40 Assorted Walls
15 Standard Walls
3 Walls with Doors
3 Walls with Double Doors
4 Entrance Walls
2 Large Entrance Walls
3 Half Walls
2 Half Walls with Doors
5 Quarter Walls
1 Three-Quarter Wall
2 Ruined Walls
2 Pillars
16 Assorted Struts
2 Chests
4 Crates
2 Tombs
2 Weapon Racks
2 Tables
3 Chairs
4 Levers
4 Barricades
1 Crucible of Resurrection
1 Well
1 Arcanist’s Desk
1 Swinging Blade Trap
1 Net Trap
A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
This texture is perfect to represent realistic snowy areas and can be combined with other products of the Dioramas series to achieve different types of snow effects.Download the HowTo Use Guide here:
This cool green texture will make your miniatures stand out on an original surface made up of emeralds and shiny stones. Depending on the position of the light, the brightness of the minerals can be observed.Download the HowTo Use Guide here:
The turquoise tone of this texture is indicated for soils with a predominance of minerals and precious stones with a bluishtone on the surface of the planets. Depending on the position of the light, the brightness of the minerals can be observed.Download the HowTo Use Guide here:
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for representing dry grass.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for spring sceneries and battle boards.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.)
The Neutral Earth texture allows the modeller to create their own earth tones. It comes in a neutral white that can be coloured with acrylics for use on diorama bases or vignettes allowing a wider range of tones.
This is a high quality acrylic product developed for extreme realism.
Stir well, slowly adding small amounts of your colour until the desired tone is achieved.
Perfect results are achieved by working in thin or thick layers.
If desired, this gel can be thinned with water or an acrylic thinner to improve the flow on the surface.
Non-toxic.
Selected natural gravel suitable for recreating railway ballast.
This reference is perfect for use in any 1/72 and H0 scale railway scene.
It can also be used in any type of terrain from 28mm to larger scales.
It can be adhered to the ground using white glue or Gravel & Sand Fixer (AK118).
Specially selected natural gravel, perfect for recreating groundworks in any type of scene or diorama.
This product is best suited for use in 1/35 scale railway scenes, but it can also be used for supplementing any type of ground on bases ranging from 28mm to larger scales.
It can be fixed to the ground using PVA glue.
Splatter Wet Ground has been formulated to create wet ground splatters and build-up on vehicles, dioramas and vignettes.
Wet Ground has just the right consistency; it handles easily with the brush, creating realistic textures of wet soil build-up and dirt on the undersurfaces of vehicles has never been easier.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
Splatter Wet Mud has been formulated to create wet mud splatter effects on vehicles, dioramas and vignettes.
Splatter Wet Mud has just the right consistency; easily handled with the brush, creating realistic wet mud splatter textures on the undersurfaces of vehicles has never been easier.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
This two-component product allows room settings with ice.
The resin worked in thin layers allows breaking and texturing the pieces of ice.
It also includes an acrylic product to imitate surface textures.
It can be combined with other products of the Dioramas series to get many settings.
Content:
Ice Resin 120ml
Hardener 30ml
Ice Surfazes 17ml
2 Syringes
This is a two-component colored resin with low odor, intended to simulate radioactive and toxic water in scenery, dioramas, etc.Two-component epoxy type resin with low odor. Resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box.
Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm.
Instructions and guide are included in the box
This is a two-component colored resin with low odor, intended to simulate standing water in sceneries, dioramas, etc.The resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box.
Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm.
Content: 180ML (120 resin + 60 hardener). Contains 2 syringes.
Instructions and guide are included in the box
Hobby sand is an indispensable material on any modeler's table or workshop as it is ideal for building realistic terrain in dioramas, decorating miniature bases for wargames, and many other creative hobbies. Made of an easy-to-glue and paint material, it is also available in a wide range of colors and sizes, allowing you to choose the most suitable option for each project. When applied to the base or floor of a model, it imitates the natural textures and characteristics of real landscapes, providing a high level of detail and authenticity.
It is recommended to apply with PVA glue, tuft glue, or cyanoacrylate glue.
Contains: 200 ml (approximate weight 100gr)
Size of grain: Approx. 2-5mmColor: NaturalContains: 200ml (approximate weight 100gr)
Hobby Sand
Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue.
Size of grain: Approx. 1-3mmColour: FieldContains: 200ml
Hobbyzand
Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen.
Korrelgrootte is 1-3mm (grof)
Veldkleur
Verpakking is pot met draaideksel
Inhoud 200ml (ong 100gr)
Hobby Sand
Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue.
Size of grain: Approx. 1-3mmColour: RedContains: 200ml
Hobbyzand
Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen.
Korrelgrootte is 1-3mm (grof)
Roodachtig (zacht rood)
Verpakking is pot met draaideksel
Inhoud 200ml (ong 100gr)
Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Traffic Lights 70mm printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x
Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: 50x70mmScale: 1:58 - 1:48Content: 5x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
The accessories you need to play Spearhead games of Warhammer Age of Sigmar
Twist and battle tactic cards help to keep your Spearhead games tactical and different every time
Contains a themed gameboard and push-fit terrain for setting the scene
The contents of this set can be found within the Warhammer Age of Sigmar: Skaventide boxed set
This pack contains the cards, terrain, and accessories for playing Spearhead games of Warhammer Age of Sigmar. The gameboard is 30”x22.4” – the specified size for Spearhead games – and features pre-printed objective markers for your armies to fight over. The four pieces of terrain are ideal for adding extra dimensions to your games, creating opportunities for cover and ambush. Also included are themed twist cards that ensure games are close right until the final dice roll, and battle tactics cards, which dictate how to score victory points and offer powerful one-off effects.CONTENTS– 1x Double-sided gameboard: This gameboard features five objectives printed on each side and is designed for use in your Spearhead games. It depicts the blasted landscape of Aqshy, the Realm of Fire, on one side and the green land of Ghyran, the Realm of Life, on the other.– 4x Plastic push-fit pieces of terrain: This terrain set shows fractured Sigmarite architecture that has been desecrated with the icons and aesthetics of the twisted Skaven. It is also ideal for playing out the Spearhead games featured in the Spearhead: Fire and Jade book.– 36x Spearhead cards: These cards contain twists and battle tactics ready for you to shuffle and draw during your Spearhead games.– 1x 6" Plastic range ruler and 1x 3" plastic range ruler: Featuring sculpted skull and rat icons to designate inches, these range rulers can be used separately, or pushed together to make a single 9" range ruler for use in your games.These push-fit miniatures can be assembled without glue and are supplied unpainted – we recommend using Citadel Colour paints.
Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.
They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama.
Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted.
Thickness: 2 mmSize: 150x225 mmContent: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Plasticard - Industrial Cladding 5mm Textured Sheet
Embossed styrene plastic sheets can be used to create roofing, flooring, siding, rock, stone, metal plates, and other architectural parts. The sheets are demanded by architectural firms and hobbyists for their accurate, embossed detailing and versatility. Very easy to cut and glue.
Widely used in the modeling world, they can be used to create ceilings, floors, cladding, rock, stone, metal plate, and other architectural pieces.
This set contains 1 Plasticard sheet in color brown
Size: 170x300x0.7 mm
Scale: 1:48 - 1:72
Plasticard - Wood Planking Textured Sheet
Embossed styrene plastic sheets can be used to create roofing, flooring, siding, rock, stone, metal plates, and other architectural parts. The sheets are demanded by architectural firms and hobbyists for their accurate, embossed detailing and versatility. Very easy to cut and glue.
Widely used in the modeling world, they can be used to create ceilings, floors, cladding, rock, stone, metal plate, and other architectural pieces.
This set contains 1 Plasticard sheet in color brownSize: 200x300x0.7 mm
Scale: 1:35 - 1:48 - 1:72
