The dark and narrow streets of Dunsmouth, Rhode Island is home to a small fishing community. Typically in communities like this everyone knows everyone else's business, but not in Dunsmouth. Here people keep themselves to themselves and there is a constant state of tension and paranoia that hangs over the town like a cloying mist. The well above average number of unexplained disappearances seem to go uninvestigated by the authorities and the inhabitants tend not to discuss such things with outsiders, if they take the time to talk to them at all. Dunsmouth is not a place to take a summer vacation, in fact you would do well to give the place a wide berth.
This Warcradle Scenics Dunsmouth Scenery kit contains;
Street Scatter, featuring
2x Newsstands
2x News Signs - Sandwich boards
4x Single Lamp Posts
2x Double Lamp Posts
Please note:
Scenery items are manufactured in Medium Density Fibre Board (MDF).
Buildings are supplied pre-painted and some assembly will be required.
Assembly instructions can be found online and by scanning the QR printed on the packaging.
We use these buildings for both Dead Man's Hand as well The Chicago Way
As Retribution becomes the foothold for the Union in the untamed west, Union Station is always bustling. Bringing in new soldiers fresh out of boot camp to reinforce the troops, folks of all kinds hoping to make their fortune, supplies from back east to keep the growing population fed and watered as well as moving money back east along with those people who don't make it in this rough and tumble part of the Arizona district.
This Warcradle Scenics Retribution - Union Station contains;
1x Retribution Union Station
Please note:
Scenery items are manufactured in Medium Density Fibre Board (MDF).
Buildings are supplied primed and some assembly will be required.
Assembly instructions can be found online and by scanning the QR printed on the packaging.
We use these buildings for both Dead Man's Hand and The Chicago Way
The dark and narrow streets of Dunsmouth, Rhode Island is home to a small fishing community. Typically in communities like this everyone knows everyone else's business, but not in Dunsmouth. Here people keep themselves to themselves and there is a constant state of tension and paranoia that hangs over the town like a cloying mist. The well above average number of unexplained disappearances seem to go uninvestigated by the authorities and the inhabitants tend not to discuss such things with outsiders, if they take the time to talk to them at all. Dunsmouth is not a place to take a summer vacation, in fact you would do well to give the place a wide berth.
This Warcradle Scenics Dunsmouth Scenery kit contains;
1x Tackle Shop, featuring
1x Shop
1x Bench
2x Barrels
2x Anchors
1x Small Crate
3x Fishing Rods/Spears
2x Lobster Cages
Please note:
Scenery items are manufactured in Medium Density Fibre Board (MDF).
Buildings are supplied pre-painted and some assembly will be required.
Assembly instructions can be found online and by scanning the QR printed on the packaging.
We use these buildings for both Dead Man's Hand as well The Chicago Way
The dark and narrow streets of Dunsmouth, Rhode Island is home to a small fishing community. Typically in communities like this everyone knows everyone else's business, but not in Dunsmouth. Here people keep themselves to themselves and there is a constant state of tension and paranoia that hangs over the town like a cloying mist. The well above average number of unexplained disappearances seem to go uninvestigated by the authorities and the inhabitants tend not to discuss such things with outsiders, if they take the time to talk to them at all. Dunsmouth is not a place to take a summer vacation, in fact you would do well to give the place a wide berth.
This Warcradle Scenics Dunsmouth Scenery kit contains;
1x Wall & Gate
1x Car
1x Fountain
1x Table
6x Chairs
1x Bridge
1x Gazebo
1x Groundskeeper's House
1x Kennel
1x Crates
Please note:
Scenery items are manufactured in Medium Density Fibre Board (MDF).
Buildings are supplied pre-painted and some assembly will be required.
Assembly instructions can be found online and by scanning the QR printed on the packaging.
We use these buildings for both Dead Man's Hand as well The Chicago Way
This pack accessorises any dungeon with classic furniture and scatter terrain, from simple tables and chairs, to bookcases filled with arcane lore, to racks of deadly weaponry. You’ll also find chests, crates and tombs ready to be looted and mysterious levers to be pulled, and when all is said and done you can relax by the fire…
The terrain is supplied flat-packed on high-quality, high-density card, printed in full colour on both sides, so no painting required! The terrain requires assembly, and some smaller parts will require glue. Please see our Tutorials page for more details and full instructions.
Compatible with Maladum.
Product Contents
2 Bookcases
2 Tombs
2 Fireplaces
2 Chests
2 Tables
2 Grand Chairs
2 Chairs
2 Weapon Racks
2 Crates
2 Levers
2 Piles of Books
21 Assorted Scatter Components and Accessories
This box expands your Battle Systems Dungeon with unique walls, floors, furniture and accessories not found in the core set. These can be used to add variety to your dungeon or castle layouts, build towering multi-level sections, or create bespoke rooms to suit your quest objectives. Just like the core set, the pieces are fully modular and can be assembled in any combination you choose for a different set-up every time.
The terrain is supplied flat-packed on high-quality, high-density card, printed in full colour on both sides, so no painting required! The terrain requires assembly, and some smaller parts will require glue. Please see our Tutorials page for more details and full instructions.
Requires the Battle Systems Fantasy Dungeon for assembly.
Compatible with Maladum. Requires the Beyond the Vaults expansion to use.
Product Contents
14 Assorted Walls
1 Standard Wall
2 Walls with Doors
3 Half Walls
1 Half Wall with Door
2 Walls with Alcoves
2 Strongroom Walls
1 Strongroom Wall with Door
1 Wall with Secret Chamber
1 Wall with Hidden Passage
1 Forge
1 Portcullis
1 Large Floor Tile
2 Small Floor Tiles
4 Ruined Floor Tiles
1 Spiral Staircase
4 Buttresses
4 Crenelation Panels
1 Balcony
2 Plinths
2 Treasure Chests
2 Chairs
1 Carrier
1 Anvil
1 Statue
2 Tapestries
2 Furs
4 Gargoyles
91 Assorted Scatter Components and Accessories
2 Pits
4 Grave Point Markers
8 Sconces
27 Assorted Scatter Components and Accessories
44 Plastic Clips
This terrain, by its texture and tonality, allows the creation of volcanic environments. For more realism, it can be combined with lava areas, making grooves when the surface is cool.
Download the HowTo Use Guide here:
** Watch here a video on how to use the product.
Texture to recreate cold environments on arid planets or moons of any galaxy. Depending on the position of the light, the brightness of the different minerals that make up this terrain can be observed.Download the HowTo Use Guide here:
This product is a preservative for reusable natural plants.
You just need to put the branch or the small plant in the container with the product overnight and the sap will be replaced by the agent getting it to remain undamaged or wither in our diorama.
The plants can be painted with acrylics in order to avoid that t plants color can be weakened over time by the elimination of chlorophyll.
The jar is wide enough to put the plants without difficulty.
Volume: 250ml
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).
Artificial or static grass is one of the most commonly used products in any modeling genre.
This color is perfect for summer sceneries and battle boards.
Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year.
To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this.
Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved.
Contents: (250 ml.)
Foam Sealer is a fine paste intended for sealing any type of foam.This paste does not damage the foam and protects it from subsequent aggressive processes.It is an acrylic product, so you can dilute it with water and clean your tools easily.We recommend to apply it with a spatula to distribute the paste over the foam.Dries in one hour (depending on the thickness of the applied layer and the environmental conditions).Comes in a neutral white color not to affect the further paint layers.Close the packaging well, allowing the product to last longer.Use a spatula or an old brush for handling.
Volume: 250ml.
*Download the HOWTO use product guide here.
Neutral Texture for Rough Terrain is specially designed to reproduce rough and base of rocky terrains on your dioramas and vignettes.
Just add the acrylic color desired, mix well and apply to achieve extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Light Earth is the perfect product in texture and tone for recreating lighter shades of earth on diorama or vignette bases where light earth tones and fine textures are needed.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas and vignettes.
Perfect results in thin or thick layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Desert Sand is a fine and smooth texture for any type of desert scene such as North Africa.
Perfect for making dunes, this product can be shaped when wet and sanded once dry.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas and vignettes.
Perfect results in thin or thick layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Wet Ground texture is the perfect texture and color for recreating any wet soil or dirt natural surface.
Allow 24 hours to completely dry; prior to drying, wheel, track marks, or whatever you wish can be pressed into the surface.
Acrylic product for textures in dioramas.
Perfect results in thin or thick layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Pacific Blue dense gel specially developed to mimic the waters of the Pacific Ocean.
To create a sense of depth, apply the gel over a painted surface.
Drying time is dependent on the amount used; however, 24 hours is what we recommend.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas.
Perfect results in layers from 0.1 to 3 mm.
It can be diluted with water or an acrylic thinner to improve its flow.
Perfect for 1:700 and 1:350 scales or for any other diorama.
No toxic.
Atlantic Blue dense gel specially developed to mimic the waters of the Atlantic Ocean and open waters.
To create a sense of depth, apply the gel over a painted surface.
Drying time is dependent on the amount used; however, 24 hours is what we recommend.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas.
Perfect results in layers from 0.1 to 3 mm.
It can be diluted with water or an acrylic thinner to improve its flow.
Perfect for 1:700 and 1:350 scales or for any other diorama.
No toxic.
Gel to replicate transparent water.
Specially developed to mimic moving, shallow water.
Drying time is dependent on the amount used; however, 24 hours is what we recommend.
This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas.
Perfect results in layers from 0.1 to 3 mm.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Corrosion texture is an acrylic product that has been formulated for creating surface textures such as corrosion on vehicles, or any element of your dioramas, and vignettes.
The composition of this product allows extremely realistic, scale correct textures every time.
Corrosion texture is best applied in a thin layer; once dry, pigments can be added for more realism and different shades of rust.
No toxic.
Wet Crackle Effects has been formulated to create wet crackle ground on the undersurfaces of vehicles, dioramas and vignettes.
This product has been developed for the creation of correct scale crackle effects.
On an acrylic base, use a thin coat and allow to dry. You can modify the thickness of the layer or speed up the drying process with a hairdryer.
Non-toxic.
** Watch here a video on how to use crackle effects textures.
Light and Dry Crackle Effects has been formulated to create dry, cracked floors on the undersurfaces of vehicles, dioramas and vignettes.
This product has been developed for the creation of scale crackle effects.
On an acrylic base, use a thin coat and let dry. You can modify the thickness of the layer or speed up the drying process with a hairdryer.
Non-toxic.
** Watch here a video on how to use crackle effects textures.
** Another video on how to use it here.
** Download here a tech sheet on how to use it to make burnt wood.
Dark and Dry Crackle Effects has been formulated for creating dark and crackled soil on the lower surfaces of vehicles, dioramas, and vignettes.
This product has been developed for the creation of scale crackle effects.
On an acrylic base, use a thin layer and let dry. You can modify the thickness of the layer or speed up the drying process with a hairdryer.
No toxic.
** Watch here a video on how to use crackle effects textures.
Splatter Dry Mud has been formulated to create dry mud splatter effects on vehicles, dioramas and vignettes.
Dry Mud has just the right consistency; easily handled with the brush, creating realistic dry mud splatter textures on the underside surfaces of vehicles has never been easier.
Ideal for adding the finishing touches of texture to the underside of your model or terrain.
Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area.
It can be thinned with water or an acrylic thinner to improve its fluidity.
Non-toxic.
Spring snow texture used to achieve ultra-realistic thin layers of snow.
Snow sprinkles is a versatile product that can be used on its own; it also combines perfectly with AK8011 Snow Terrains.
This is a high quality acrylic product developed for extreme realism.
The drying time takes from 2-4 hours depending on the amount applied and temperature.
Acrylic product to achieve snow texture.
Perfect result in thin layers.
It can be diluted with water or an acrylic thinner to improve its flow.
No toxic.
Hobby Sand
Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue.
Size of grain: Approx. 0.5mmColour: RedContains: 200ml
Hobbyzand
Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen.
Korrelgrootte is 0.5mm (fijn)
Veld kleur (field)
Verpakking is pot met draaideksel
Inhoud 200ml ongeveer 100gr
Hobby Sand
Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue.
Size of grain: Approx. 0.5mmColour: RedContains: 200ml
Hobbyzand
Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen.
Korrelgrootte is 0.5mm (fijn)
Zacht rode kleur
Verpakking is pot met draaideksel
Inhoud 200ml
Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: 50x50mmScale: 1:58 - 1:48Content: 5x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.
They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama.
Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted.
Thickness: 2 mmSize: 150x225 mmContent: 1 set
Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.
They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama.
Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted.
Thickness: 2 mmSize: 150x225 mmContent: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
In the far reaches of the galaxy lay grim war-torn settlements, shadowy planetary bases and disused space stations. They resemble the gothic buildings of old, societal and technological remnants of a darker age.
This box contains everything you need to build a multi-level gaming board covering an area of up to 22″ x 30″ / 559mm x 762mm or larger, suitable for all 28-35mm sci-fi games in a dark future. It includes multiple ruined buildings and pieces of industrial equipment. All the pieces are modular and can be assembled in any combination you choose for a different set-up every time. The set can be expanded with other sets from the Battle Systems terrain range.
The terrain is supplied flat-packed on high-quality, high-density card, printed in full colour on both sides, so no painting required! The terrain requires assembly, and some smaller parts will require glue. Please see the tutorials for more details and full instructions.
Compatible with Battlesystems' CoreSpace, First Born, and ideally suited for Kill Team, Warhammer 40,000, Stargrave, and other similar game systems.
PRODUCT CONTENTS
1 Printed Neoprene Gaming Mat 22" x 30" / 559mm x 762mm
38 Assorted Walls
24 Standard Walls
4 Hatchway Walls & Doors
3 Cable Hatchways
4 Half Walls
3 Half Wall Hatchways & Doors
28 Ruined Wall Sections
4 Ruined Floor Sections
4 Buttresses
4 Arc Doorways
4 Airlock Doors
4 Columns
1 Furnace/Chimney with Viewing Platform
1 Fuel Tank Stack
2 Exhaust Vents
1 Cargo Robot
1 CO2 Scrubber
3 Blast Shields
1 Ladder
3 Ground Conduits
5 Large Cargo Crates
5 Small Cargo Crates
3 Thrones
3 Consoles
16 Assorted Struts
77 Assorted Scatter Components and Accessories
94 Plastic Clips
