This set contains 6 acrylic paints essential for painting any skin and leather texture on any figure or model, making the proper transitions between them to achieve a realistic look. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. When diluted with dedicated thinner, they can be airbrushed as easily as lacquer- based paints.
The set contains:
AK11026 – Tenebrous Grey
AK11078 – Medium Orange
AK11102 – Deep Brown
AK11110 – Leather Brown
AK11115 – Light Earth
AK11118 – Ochre
It comes in 17ml bottles.
This set contains 6 acrylic paints essential for painting any intense effect on any figure or model.
The intensity of their pigments make these paints very special.
They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
When diluted with dedicated thinner, they can be airbrushed as easily as lacquer-based paints.
The set contains:
AK11045 DEEP YELLOW
AK11080 DEEP ORANGE
AK11088 DEEP RED
AK11074 DEEP PURPLE
AK11142 DEEP GREEN
AK11182 DEEP BLUE
It comes in 17ml bottles.
This set contains 6 acrylic paints essential for painting any white figure or model, making the proper transitions between them to achieve a realistic look.
They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
The set contains:
AK11001 WHITE
AK11002 OFFWHITE
AK11006 SILVER GREY
AK11009 WARM GREY
AK11017 REDDISH GREY
AK11021 BASALT GREY
It comes in 17ml bottles.
This set contains 6 acrylic paints, essential for applying red finishes to any figure or accessory. These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. Diluted can be airbrushed as easily as lacquer-based paints. Matte finish
The set contains:
AK11092 MATT RED
AK11088 DEEP RED
AK11085 CADMIUM RED
AK11077 LIGHT ORANGE
AK11042 VOLCANIC YELLOW
AK11097 BURNT RED
It comes in 17ml bottles.
This set contains 6 acrylic paints, essential for applying green finishes to any figure or accessory. These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. Diluted can be airbrushed as easily as lacquer-based paints. Matte finish.
This set contains:
AK11133 DARK GREEN GRAY
AK11146 DARK GREEN
AK11142 DEEP GREEN
AK11141 LIGHT GREEN
AK11147 OLIVE GREEN
AK11139 GOLDEN OLIVE
It comes in 17ml bottles.
This set contains 6 acrylic paints essential for painting any neon or fluorescent effect on figures or models.
The intensity of their pigments make these paints very special.
They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. When diluted with dedicated thinner, they can be airbrushed as easily as lacquer-based paints.
The set contains:
AK11049 FLUORESCENT YELLOW
AK11068 FLUORESCENT MAGENTA
AK11081 FLUORESCENT ORANGE
AK11082 LUMINOUS ORANGE
AK11129 FLUORESCENT GREEN
AK11178 FLUORESCENT BLUE
*Recommended to use a white surface or primer as the fluorescent resin is a special semi-transparent resin to keep all properties and vivid of fluor colors
It comes in 17ml bottles.
This set contains 6 acrylic paints with super fine metallic pigments.
They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
The set contains:
AK11192 OLD GOLD
AK11194 BRASS
AK11197 COPPER
AK11209 SILVER
AK11210 NATURAL STEEL
AK11212 GUN METAL
It comes in 17ml bottles.
his set contains 6 acrylic paints, essential for applying pastel finishes to any figure or accessory.
These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
When diluted with dedicated thinner, they can be airbrushed as easily as lacquer-based paints.
Matte finish.
The set contains:
AK11037 PASTEL YELLOW
AK11059 PASTEL PINK
AK11069 PASTEL VIOLET
AK11076 PASTEL PEACH
AK11131 PASTEL GREEN
AK11168 PASTEL BLUE
It comes in 17ml bottles.
This set contains 6 acrylic paints, essential for applying gold metallic finishes using the NMM (Non Metallic Metal) technique.
These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows.
They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
Diluted can be airbrushed as easily as lacquer-based paints.
The set contains:
AK11004 IVORY
AK11035 SAND YELLOW
AK11036 ICE YELLOW
AK11040 SAHARA YELLOW
AK11073 PURPLE
AK11108 HULL RED
It comes in 17ml bottles.
This set contains 6 acrylic paints, essential for applying rusty finishes and chipping effects to any model or accessory. These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. Diluted can be airbrushed as easily as lacquer-based paints. Matte finish.
The set contains:
AK11101 ORANGE BROWN
AK11103 MEDIUM RUST
AK11105 LIGHT RUST
AK11107 DARK RUST
AK11108 HULL RED
AK11113 CHOCOLATE (CHIPPING)
It comes in 17ml bottles.
This set contains 6 acrylic colors, essential for painting different flesh and skin tones on historical and fantasy figures. These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. Diluted can be airbrushed as easily as lacquer-based paints. Matte finish
This set contains:
AK11064 BEIGE RED
AK11055 SUNNY SKIN TONE
AK11052 BASIC SKIN TONE
AK11098 BLACK RED
AK11075 VIOLET RED
AK11096 RED WINE
It comes in 17ml bottles.
This set contains 6 acrylic paints, essential for applying metallic finishes using the NMM (Non Metallic Metal) technique. These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion. Diluted can be airbrushed as easily as lacquer-based paints.
“How to use guide inside”
The set contains:
AK11001 WHITE
AK11029 BLACK
AK11006 SILVER GRAY
AK11019 GRAPHITE
AK11167 ANTHRACITE GRAY
AK11173 OCEAN BLUE
It comes in 17ml bottles.
Volume: 400 ml
Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective.
This primer has excellent coverage and is recommended for use prior to painting.
Works on plastic or metal.
These cans of spray paint are extremely useful for painting large or small surfaces.
The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering.
Ultra resistant and with the best adherence.
Before using you will need to shake the spray well, at least a minute to get a good mixture.
Volume: 400 ml
Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective.
This primer has excellent coverage and is recommended for use prior to painting.
Works on plastic or metal.
These cans of spray paint are extremely useful for painting large or small surfaces.
The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering.
Ultra resistant and with the best adherence.
Before using you will need to shake the spray well, at least a minute to get a good mixture.
Volume: 400 ml
Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective.
This primer has excellent coverage and is recommended for use prior to painting.
Works on plastic or metal.
These cans of spray paint are extremely useful for painting large or small surfaces.
The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering.
Ultra resistant and with the best adherence.
Before using you will need to shake the spray well, at least a minute to get a good mixture.
The ultimate liquid to remove paint completely or selectively from models or figures without damaging plastic, resin or white metal.
Apply to the surface or miniature to be stripped and rub with a brush.
Once the paint has been removed, wash the piece with soap and water to remove all traces of grease and product.
Do not leave the parts immersed for a long time, as this product could damage the details if used incorrectly.
Volume: 250ml
What is filler primer spray?
Spray Filler, also known as Primer Filler or Spray Putty (Surface Thick Primer | Spray Putty | Primer Filler), is a type of high-density primer used to level, and fill imperfections and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines in 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA Foam.
In cosplay, the spray filler is essential for preparing armor and props before the final paint job, ensuring a smooth and even surface. It is also used on pieces made with 3D printing in PLA, facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.
Thanks to its filling and smoothing capacity, it is an essential product for those seeking professional finishes in the creation of props, miniatures, car and bike repairs, and their helmets, as well as models and detailed pieces in any craft project.
Content: 1x 400ml
How to use filler primer spray?
Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If smooth or glossy, sand lightly with fine sandpaper (400-600) to improve adhesion.
Product Agitation: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at a temperature between 10°C and 25°C and humidity below 65%. Do not apply in windy, extremely cold, or high-humidity conditions.
Spray Application: Hold the spray at a 15-20 cm distance. Apply in thin, uniform coats with smooth, steady strokes. Wait 5-10 minutes between coats before reapplying.
Drying and Finishing: Dry to the touch in 30 minutes. Complete drying in 24 hours. For a more uniform finish, sand lightly before painting.
Spray Cleanup: After use, invert the sprayer and press the valve for a few seconds to clean the nozzle.
WARNINGS
Keep out of children's reach.
Keep away from heat/sparks / open flames / hot surfaces.
Do not spray on an open flame or another source of ignition.
Do not pierce or burn, even after use.
Keep the recipient hermetically sealed.
IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
Gloss Primer White 400ml
Gloss White Primer Paint with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent gloss finish.
The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering.
Contents 1x Spray can 400ml
INSTRUCTIONS FOR USE:
- Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers.
WARNINGS
Keep out of children's reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
SPRAY Primer Colour
Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.
The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering.
Contents 1x Spray can 400ml
INSTRUCTIONS FOR USE:
- Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers.
WARNINGS
Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
Volume: 150 ml
This self-leveling coating is useful for filling bumps, dents, scratches, for removing bubbles, texturing…
It is suitable for large-scale repairs and can be used as soluble putty.
Before using Microfiller primer you will need to shake the spray well, at least a minute to get a good mixture.
Once dry, it perfectly covers all the small imperfections, scratches, moulding marks, sanding abrasions and all minor defects.
Then, after a smooth sanding, you’ll have a perfect surface for successfully applying the paint that suits you best.
SPRAY Primer Colour
Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.
The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering.
Contents 1x Spray can 400ml
INSTRUCTIONS FOR USE:
- Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers.
WARNINGS
Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
#greenstuffworld #matt #ochre #primer #400ml
SPRAY Primer Colour
Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.
The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering.
Contents 1x Spray can 400ml
INSTRUCTIONS FOR USE:
- Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers.
WARNINGS
Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
#greenstuffworld #matt #white #primer #400ml
Airbrush Cleaner
Cleaning solution designed for removing acrylics from brushes and airbrushes. Eliminates paint residue and lubricates the mechanism of the airbrush without causing any damage. Can be used to rinse between colors by adding a little water to the solution, as well as for a full cleanse after painting. Also works with ultrasonic cleaners by adding 50% of water to the solution.
Content: 240 ml
#airbrush #cleaner #240ml #cleaning #solution #greenstuffworld
Paint Remover 240 ml
GSW Paint Remover, capable of removing acrylic, enamel, and lacquer-based paints. Completely safe for miniatures in plastic, resin, or metal. Can be reused several times and has low evaporation. Very low smell.
Partially submerge miniature in the paint stripper/paint killer for 1 to 6 hours depending on the paint type, rinse with water and remove excess with a synthetic brush. If insufficient, repeat the process.
Content: 240 ml
WARNINGS:- The product has been tested with a large number of plastics, metals, and resins, however, new formulas and qualities of plastics and resins continue to appear on the market. If your resin is very brittle or weak and you are in doubt about the strength of your plastic or resin, test a small piece for less time to confirm its strength.
- If the figures were spray-primed, when removing the paint, they could show defects in the plastic or resin due to the strong propellants included in the paint sprays.
#paint #remover #greenstuffworld #240ml
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers.
It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges.
It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml/2.02 fl oz bottles (ref. 73.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades.
Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks.
Packaging:Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.
Safety:Metal Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.
